Juki HZL DX5
Features
Box Feed evenly feeds fabric and stays in contact with your fabric longer for a more consistent seam
A simple switch allows you to switch to a single needle hole for straight stitching
Float function allows you to sew with the presser foot slightly raised
The float function allows you to sew multiple layers without creating uneven seams
Automatic Needle Threader 
Change the length without changing the density of the pattern
Adjust the length and width of the stitch at the turn of a dial 
Free Motion
Direct Stitch Pattern Selection 
Applique Corner Sewing
Specifications
Control system - Computer
Number of stitch patterns - 185
Number of available fonts - 3
Buttonhole - Automatic (sensor system) with clamping plate
Direct stitch pattern selection - 10 patterns
Start/stop button
Number of stitch patterns - 185
Number of available fonts - 3
Buttonhole - Automatic (sensor system) with clamping plate
Direct stitch pattern selection - 10 patterns
Start/stop button
- Green: Ready to start and/or while sewing
- Red: Not ready to start
- Orange: When the lock stitch button is pressed while the sewing machine is engaged in pattern sewing
Maximum stitch speed - 1,050 sti/min
Auto thread trimming - X
Automatic needle threader - Automatic needle threader
Thread tension system - Automatic
Automatic lock stitch - Automatic lock stitch and thread trimming
Feed mechanism - BOX feed mechanism
Presser foot pressure adjustment - Stepless adjustment
Drop feed - X
Quick bobbin preparation - X
Bobbin thread winder - Bobbin winder with independent motor
Light - 1 LED light
Straight Stitch Slide Needle Plate - X
Float Function - X
Free Arm - X
Change in the length/width of stitches - Button system
Number of needle position (straight stitch/other than straight stitch) - 37/3
Pattern (right and left) reverse - X
Twin needle sewing - X
Adjustable starting / reverse stitch speed - X
Lock stitch - X
Low-speed inching sewing - X
Presser foot pivot function - X
Memory function - 10 patterns
Presser foot horizontality holder button - X
Height of lifting of presser foot (1 step/2 steps) - Button system: 6 mm
- Lever system: 6 mm / 12 mm
Hard case - Hard case with accessory storage part
Knee lifting lever - X No
Foot controller - Included; with foot switch function
Dimensions - 17.5"(W) x 11.5"(H) x 8.3"(D)
Dimensions with hard case - 20"(W) x 12"(H) x 10"(D)
Arm size - 8.0" x 4.4"
Weight - 21.6lbs
Accessories
- Standard presser foot
- Zipper presser foot
- Overcasting presser foot
- Blind stitch presser foot
- Buttonhole presser foot
- Manual buttonhole presser foot
- Walking foot
- Patchwork presser foot
- Quilt presser foot
- Bobbin (4)
- Needle set HA X 1 #11(1):#14(1):#16(1):for knit #11(1)
- Twin needle
- Quilt guide
- Auxiliary spool pin
- T-shape screwdriver
- Ripper
- Cleaning brush
- Spool cap (Large)
- Spool cap (Middle)
- Spool cap (Small)
- Foot controller
- Knee-lifting lever
- Power cord
- Hard case
- Instruction manual
- Operation support DVD
718.468.5858 223-20 Union Turnpike, Bayside, NY 11364
TUE-FRI: 10-6 | SAT: 10-5 | SUN-MON: CLOSED
TUE-FRI: 10-6 | SAT: 10-5 | SUN-MON: CLOSED
